17.5-25

CONSTRUCTION MACHINERY TYRE

Large load, small flow resistance, low energy consumption, good wear resistance, puncture resistance, anti-tire blowout, main-tenance free, suitable for port, metallurgy industry front crane, gantry crane, loader and other special vehicles.

NO	Tyre Size	Rim	section width /mm	section width /mm	Max Load(KG)
					10MPH	16MPH	25MPH
1	8.25-16	6.5	805	194	3460	3190	2955
2	9.00-16	6.0	884	259	3760	3460	3185
3	10.00-16	8.0	884	278	5230	4775	3670
4	20.5/70-16	10.0	878	275	6135	5965	5625
5	16/70-16	10.0	878	275	6135	5965	5625
6	16/70-20	13.0	1012	375	9445	9105	8600
7	9.00-20	6.5	1038	259	5135	4690	4355
8	10.00-20	8.0	1073	278	6085	5560	5165
9	11.00-20	8.0	1095	300	6430	5870	5450
10	12.00-20	8.5	1180	310	7435	6785	6300
11	14.00-24	10.0	1368	375	10135	9255	8595
12	17.5-25	14.00-25	1344	437	9680	8800	8000
13	20.5-25	17.00-25	1490	530	10890	9900	9000
14	23.5-25	19.00-25	1585	585	14597	13270	12064
15	26.5-25	22.00-25	1750	670	18513	16830	15300
16	29.5-25	25.00-25	1870	750	26378	23980	21800

FAQ：

Q1：What are the advantages of solid tires compared with pneumatic tires?

A：Solid tires require no inflation, completely avoiding the risk of blowouts, and their puncture and wear resistance are 3-5 times that of pneumatic tires. They are suitable for low-speed, heavy-load indoor/short-distance operation scenarios such as forklifts and port trailers.

Q2：What is the applicable speed range of solid tires? Can they be used for high-speed driving?

A：Solid tires are designed for low-speed operation, with a recommended maximum speed of 10-20 km/h for most models. They cannot be used for high-speed driving, as high speed will cause excessive heat generation of the tire, accelerate rubber aging, and affect service life.

For further inquiries, please contact us for professional assistance.